PU-4C442 Convection Blower forEnglander (Pre 2002) Pellet Stove

Description:  Compatible Models: PU-4C442 Blower Motor for Englander Pellet Stove Models 25-PDVC, 55-SHP10, 25-EP, 55-SHP10L, 55-TRP10, 55-SHPEP, 25-EPI, 25-PFS, 25-CBEP, 55-SHPCBEP, 55-TRPCBEP, 55-TRPEP, 55-SHPEPI, 55-TRPEPI, 25-PFSP  Compatible Models: PU-4C442 Blower Motor for Englander Pellet Stove Models (only for the following listed models Pre 2002) 25-PDV, 55-TRP22, 55-SHP22, 25-PDVE, 55-SHP22E, 25-PDVP, 25-PI, 55-SHP15, 55-TRP15, 55-SHP20, 55-TRP20, American Heritage Pellet Stoves  Technical Specifications: 115V, 60Hz, 0.94A, 3000RPM, 140CFM, Wiring Connectors: 5" with 1/4" Male Terminal, and 2pcs 24" with 1/4" Female Terminal; Replacement part number: PU-4C442 Quiet Operation: PU-4C442 Convection Blower is a complete assembly with gaskets and additional cables for smooth and efficient operation with low noise and vibration,   NOTE: Before purchasing, please make sure which year your unit was manufactured and if the model number is correct!!!! If you encounter any problems, please feel free to contact us, we will reply you within 24 hours  Powerful Functionality: PU-4C447 Convection Blower forces hot air from the pellet stove into your living area, warming the room for a quiet, cozy experience, pu-4c442 blower motor replacement Long-lasting, safe and reliable, your Englander pellet stove will run efficiently

Specifications:

Volts: 115

Cycles: 60Hz

Amps: 0.94

RPM: 3000

CFM: 140

Replacement for Part Number: PU-4C442

Compatible Englander Pellet Stove Models:

25-CBEP, 55-SHPCBEP, 55-TRPCBEP

25-EP, 55-SHPEP, 55-TRPEP

25-EPI, 55-SHPEPI, 55-TRPEPI

25-PDV, 55-SHP22, 55-TRP22 (Pre: 2002)

25-PDVC, 55-SHP10, 55-SHP10L, 55-TRP10

25-PDVE, 55-SHP22E (Pre: 2002)

25-PDVP, 55-SHP15, 55-TRP15 (Pre: 2002)

25-PFS, 25-PFSP

25-PI, 55-SHP20, 55-TRP20 (Pre: 2001)

Advantage & Benefit:

High Quality Bearing Motor

UL Certified

Powerful, Quiet, Energy Efficient and Long Lasting.

Please note:

Models manufactured in 1989-1990, use one blower. Models manufactured in 1991-1995, use two blowers. 1996 and later use one room air blower.

If your stove uses two blowers you will have to bend the mounting flange on the blower. If the blower is mounted on the left side, it must have the bend in the flange on the intake side of the blower. If the blower is to be mounted on the right side of the stove, the bend in the flange will be on the motor side of the blower.